Clean each Conductor with Acetone

Clean each Conductor with Acetone

Confirm task by ticking the box

Tape Leads

Tape 1 layer 1/2 lap with Kapton Tape

Confirm task by ticking the box

Tape 1 layer 1/2 lap with Nomex Strip

Confirm task by ticking the box

Tape 1 layer catch lap with Glass Tape

Confirm task by ticking the box

Tape evolude 1 layer 1/2 lap with Kapton Tape

Tape evolude 1 layer 1/2 lap with Kapton Tape with the conductors as pairs

Confirm task by ticking the box

Tape evolude 1 layer 1/2 lap with Kapton Tape

Tape evolude 1 layer 1/2 lap with Kapton Tape with conductors as 4

Confirm task by ticking the box

Tape 1 layer 1/2 lap with Yellow Glass Tape

Tape 1 layer 1/2 lap with Yellow Glass Tape

Confirm task by ticking the box

Tape outer evolude & 4 corners 1 layer ½ lap Kapton 1st set conductors

Tape outer evolude & 4 corners 1 layer ½ lap Kapton 1st set conductors

Confirm task by ticking the box

Tape inner evolude & 4 corners 1 layer ½ lap Kapton 2nd set conductors

Tape inner evolude & 4 corners 1 layer ½ lap Kapton 2nd set conductors

Confirm task by ticking the box

Insert 1 piece Nomex strip both sides

Insert 1 piece Nomex strip both sides

Confirm task by ticking the box

Insert 1 piece Kapton strip both sides

Insert 1 piece Kapton strip both sides

Confirm task by ticking the box

Tape 1 layer ½ lap Kapton from leads to evolude

Tape 1 layer ½ lap Kapton from leads to evolude, on both ends.

Confirm task by ticking the box

Insert 2 off insulation caps on the left and right side of the coil

Insert 2 off insulation caps on the left and right side of the coil

Confirm task by ticking the box

Tape 1 layer ½ lap on evolude & leads catch lap with Yellow glass tape

Tape 1 layer ½ lap on evolude & leads catch lap with Yellow glass tape

Confirm task by ticking the box

Repeat taping

Repeat taping for 46 coils

Confirm task by ticking the box